Note the use of garden tools

1, all states must be added to the machine working the throttle.
2, the Garden tools appears abnormal sound, vibration and failure to promptly notify the dealer.
3, maintenance and repair time, when moving the machine should stop operation of the engine, open the spark plug wire.
4, is strictly prohibited minors. Do not place hands near moving parts, especially the blades, so there are many instances of the problem.
5, when the machine is tilted muffler side should tilt the filter at the top.

Clean garden tools

Garden tools after each use, to its top soil cleaned, washed with water also, but you want the water to dry or dry garden tools on again close up, otherwise the tool will rust. In the use of wood to gardening tools, you can rub linseed oil to the wood, to play a protective role. Especially dipped in chemicals gardening tools, be sure to thoroughly clean as fertilizers and other chemicals can corrode metal parts. After applying fertilizer using a watering can, you want to clean the inside and outside, to avoid corrosion and debris clogging. Usually good care of your garden tools, in order to achieve the best effect when you use the time to extend the use of garden tools.

Garden tools and maintenance of common sense

1. Four-stroke gasoline engine gasoline fuel as a clean (over 90), four-stroke engine oil lubricants SAE30. The new machine idle running-two hours, change the oil after the heat engine before normal use. In normal use the accumulated work for 30 hours or so to replace an oil. Before and after each use to check the oil level. 2. When garden tools gasoline engines for work, crankcase temperature should not exceed 90 degrees, down from 15 to 20 minutes to continue working after overheating. Fuel filling must be carried out in a cold state. Cold confidential at low speed 3 minutes after normal use, do not use full throttle for a long time when not mowing. 3. Gasoline Do not overdrive. Except in an emergency, you should stop at low speeds. 4. Oil to be correct, genuine, clean gasoline to clean, fresh. 5. Non-professionals can not adjust the carburetor. When necessary adjustments generally needle clockwise gently tightened, the anti-clockwise 1.5 to 1.75 weeks.

Garden tools and maintenance of common sense

1. Always check the air filter, wash with soap and water or periodic replacement.
2. After the gasoline engine running from 100 to 300 hours, the application of wood or bamboo remove coke once. When removing the cylinder head clear, clear coke attached cylinders, cylinder heads, pistons, valves, etc. Carbon allowed to enter the cylinder bore and valve seat.
3. Kept especially clean cylinder gasoline engine fins.
4. Refueling, inspection, repair, and maintenance, to disconnect the spark plug cap, do not smoke, stay away from open flame.
5. Do not operate indoors. In addition to the operator, the unrelated persons to leave the machine working machine 15 meters.
6. Inspection before and after each use the machine part and other parts of the bolt tightness.
7. There clutch, clutch exposed before the machine is not good that the installation can not start gasoline engine.
8. Other parts of machinery lubrication, oil or grease filling regularly as required by the instructions.

Simple classification of garden tools

Classified according to the use of occasions, including Garden tools garden tools and garden tools.
In accordance with the use of object classification, can also be divided into household tools and professional tools.
In accordance with the different power, and electric engine class is divided into classes, classes using a two-stroke engine or 4-stroke engine, Honda or BS is the preferred high-end products; electric category is subdivided into categories AC and DC classes.