图片

图片

2014年2月28日星期五

Note the use of garden tools


1, all states must be added to the machine working the throttle.
2, the Garden tools appears abnormal sound, vibration and failure to promptly notify the dealer.
3, maintenance and repair time, when moving the machine should stop operation of the engine, open the spark plug wire.
4, is strictly prohibited minors. Do not place hands near moving parts, especially the blades, so there are many instances of the problem.
5, when the machine is tilted muffler side should tilt the filter at the top.

2014年2月27日星期四

Clean garden tools


Garden tools after each use, to its top soil cleaned, washed with water also, but you want the water to dry or dry garden tools on again close up, otherwise the tool will rust. In the use of wood to gardening tools, you can rub linseed oil to the wood, to play a protective role. Especially dipped in chemicals gardening tools, be sure to thoroughly clean as fertilizers and other chemicals can corrode metal parts. After applying fertilizer using a watering can, you want to clean the inside and outside, to avoid corrosion and debris clogging. Usually good care of your garden tools, in order to achieve the best effect when you use the time to extend the use of garden tools.

2014年2月26日星期三

Garden tools and maintenance of common sense

1. Four-stroke gasoline engine gasoline fuel as a clean (over 90), four-stroke engine oil lubricants SAE30. The new machine idle running-two hours, change the oil after the heat engine before normal use. In normal use the accumulated work for 30 hours or so to replace an oil. Before and after each use to check the oil level. 2. When garden tools gasoline engines for work, crankcase temperature should not exceed 90 degrees, down from 15 to 20 minutes to continue working after overheating. Fuel filling must be carried out in a cold state. Cold confidential at low speed 3 minutes after normal use, do not use full throttle for a long time when not mowing. 3. Gasoline Do not overdrive. Except in an emergency, you should stop at low speeds. 4. Oil to be correct, genuine, clean gasoline to clean, fresh. 5. Non-professionals can not adjust the carburetor. When necessary adjustments generally needle clockwise gently tightened, the anti-clockwise 1.5 to 1.75 weeks.

2014年2月25日星期二

Garden tools and maintenance of common sense



1. Always check the air filter, wash with soap and water or periodic replacement.
2. After the gasoline engine running from 100 to 300 hours, the application of wood or bamboo remove coke once. When removing the cylinder head clear, clear coke attached cylinders, cylinder heads, pistons, valves, etc. Carbon allowed to enter the cylinder bore and valve seat.
3. Kept especially clean cylinder gasoline engine fins.
4. Refueling, inspection, repair, and maintenance, to disconnect the spark plug cap, do not smoke, stay away from open flame.
5. Do not operate indoors. In addition to the operator, the unrelated persons to leave the machine working machine 15 meters.
6. Inspection before and after each use the machine part and other parts of the bolt tightness.
7. There clutch, clutch exposed before the machine is not good that the installation can not start gasoline engine.
8. Other parts of machinery lubrication, oil or grease filling regularly as required by the instructions.

2014年2月24日星期一

Simple classification of garden tools


Classified according to the use of occasions, including Garden tools garden tools and garden tools.
In accordance with the use of object classification, can also be divided into household tools and professional tools.
In accordance with the different power, and electric engine class is divided into classes, classes using a two-stroke engine or 4-stroke engine, Honda or BS is the preferred high-end products; electric category is subdivided into categories AC and DC classes.

2014年1月20日星期一

Snow removal technology research has important practical significance

Regardless of the control technology , highway snow is still inevitable. Therefore , the study of snow removal technology has a very important practical significance. The current winter snow slip main ways to take artificial snow , snow removal machinery , deicing salt snow are three main ways in which the mechanical snow removal . Apply artificial snow snow , heavy and difficult road , toll station, especially for the first snow of winter people using artificial snow for better. However, low efficiency, high cost , impact on traffic and vehicular traffic safety , not long job ; deicing or snow is to rely on the thermal effects of various chemical raw materials sprinkle shop , to snow or freezing temperatures reduce purpose . Suitable for smaller amount of snow , high temperatures, people who winter spring period , easy to melt ice on the roads of snow effect is particularly significant . But its high consumption , environmental pollution , serious damage on both sides of the road and green ; mechanical snow removal is suitable for the large- scale mechanized snow clearing operations, but its high efficiency and low consumption . Although almost no impact on traffic, all-day job , but the ice is not very thorough purge .

2014年1月6日星期一

The characteristics of snow shovels and scope of application

Snow shovels, also known as snow shovel, qing qing skis push and push the snow shovel, skis, in addition to the skis, snow shovel, snow board, suitable for highway toll station, municipal roads, streets and public places such as outdoor community.
The characteristics of
1, can push the snow, snow, ice scraper, flexible operation, high efficiency, has a strong, durable, corrosion resistant characteristics significantly.
2, by method of the cart type as auxiliary of snow shovels, can adjust the Angle

of the push the snow shovel, convenient and flexible use when convenient.
3, equipped with two rubber wheels reduces the strength of portable flexible operation.
4, foldable, easy storage, can clear snow three-dimensional fast, simple, is used widely in artificial snow shovels on society.
Materials and its composition
Snow shovels materials using the trait of galvanized sheet (stainless), is equipped with five hole adjustment holes, free to adjust the height of the snow shovels, snow shovels under special push board with a plastic skis, prevent and ground friction and noise.