With the concept of plastic garden tools of the people, gardening
tools also gradually into the homes of ordinary people's life, become
common, universal.
Garden tools plastic styles and childrens garden tool
also changed the monotonous, new modeling chic, colorful products. The
planting of flowers and vegetables into some workers of the new way of
leisure, not only can exercise the body, but also improve the
environment, the harvest of harmless vegetables. These labor, for the plastic garden tools sets
people is entertainment, as entertainment, buy says hand tools is
inevitable. Therefore, hardware city market of various high-end plastic
garden tools began Repeng, many consumers from the concept of use rises
for fashion, exquisite.
Garden tools and other aspects of meaning for garden tools. Classified according to the use of occasions, including gardening tools garden tools and garden tools.
2014年10月20日星期一
2014年10月8日星期三
The difference between garden tool set blade
Before using the garden tool set blade, we must determine a fact, the blade and the blade has a great difference.
The next is the fact that the number of cutting edge of each blade is kids garden tool set less. In a lot of workshop, the blade is still a triangular or rhombic car. The number of the best combination of cutting edge (mechanical blade) and cutting edge strength (diamond blade) the possibility of convex triangular blade provided is apparent in many workshop has not enough cognition.
In twentieth Century 70 time, the best advice is to use large size, strong blade. Hard alloy used in that era is hard, but the toughness is not good enough. Garden tool set the blade strength by its size Children garden tools to ensure. Three times a blade cutting edge length requires at least more than cutting depth. Two things have changed in the meantime. One hand, garden tool set for the average cutting depth turning have significantly reduced. A study carried out by seco tools that average cutting depth, today's turning is about 2.5~3mm. On the other hand, the fourth generation of hard alloy today has good toughness, but also its hardness (higher wear resistance). This means that for plastic garden tools sets blade, the relationship between the cutting edge length and the cutting depth can complete change. Blade geometric angles of the new generation of apparently suitable for the new situation.
2014年9月29日星期一
The children Garden Tools option to consider the principle of parting surface
The choice of parting surface, consideration should be given to decrease due to ejection angle caused by childrens garden tools sets parts size end size difference, if the mould nest in male die, because the draft caused by plastic parts size end size too big difference, when the plastic parts with ejection angle larger does not allow, using this structure makes the demoulding difficulty, if the plastic parts appearance without strict requirements, can be parting selected in the plastic part, the children garden tools can be used to release angle is small in favor of release to ensure that the plastic parts surface requirement: the plastic garden tools set plane as far as possible to choose in does not affect the appearance of parts of plastic parts and plastic parts appearance requirements.
The technical specifications of the injection machine account:
The clamping force to consider: as much as possible to reduce the projection area of plastic parts in parting face of. When the maximum injection area projection area of plastic parts in the parting plane close to close to the injection machine, has produced the overflow may, machinery blade mould parting surface size in the guarantee does not overflow case, children garden tools should be reduced as much as possible the parting surface contact area, to increase the plastic snow scoops pressure die to face, to prevent the flash, and simplify the parting surface processing.
Template space considerations: the parting surface is determined to ensure that the male and the female mould opening stroke of the shortest.
2014年9月23日星期二
Classification and introduction of plastic garden tools
Plastic garden tools and hoe is somewhat similar, just some action end more slender, used to dig more childrens garden tool land.
Plastic garden tools, the pure hand tools can be mowing, mowing, harvest. Sickles was invented in about 500 BC, and in plastic garden tools sets and thirteenth Century in europe. The first is mainly used for mowing grass, modern science and technology developed in the plastic snow scoops , all of these have now largely been motor lawnmower and combine replaced, there have been some places still use a sickle.
2014年9月15日星期一
Garden tool set style and color
Tool set garden styles and color also changed the monotonous, added with chic modelling, be riotous with colour products. Growing flowers, vegetables and so on to some workers of the new kids garden tool set of leisure, not only can exercise the body, but also improve the environment, the harvest of harmless vegetables. These labor, for the working people is entertainment, as entertainment, buy says hand tools is inevitable. Therefore, hardware city market of various high-end garden tools start Repeng, many consumers from the concept of use rises for fashion, exquisite.
Now people attach great importance to ecological environment, some plastic snow scoops or a hospital before and after the house, as far as possible to cover with green open space. For example, trees, and flowers, and a lot of people like yourself, not only the conservation of the living environment, but also can exercise the body. This part of consumers, often do not care about the price of the products, they value the product brand, quality, performance, the so-called high-end consumer demand for high-end products, and this is the reason. There are many companies, the unit demand for garden tools are no childrens garden tools used to visit, but the pursuit of convenient operation, energy saving, not only to avoid the waste of labor, and high-end garden tools although the price expensive than ordinary, but because of its long life, energy saving effect is obvious, is not lost.
Along with the concept of landscape greening win support among the people, gardening tools also gradually into the homes of ordinary people's life, become common, universal.
2014年9月11日星期四
Principle children garden tools machinery blade
Selection of parting surface consideration principle:
1 the quality of plastic parts considered
Ensure the dimension precision of plastic parts
B. select the parting surface, consideration should be kids garden tool set to reduce the draft caused by plastic parts size end size difference, if the mould nest in male die, because the draft caused by plastic parts size end size difference is too big, when the plastic parts with draft larger does not allow, the structure that is difficult, if children garden the appearance of the tools without strict requirements, but will die in the plastic part, it can be used to draft the smaller to release to ensure that the plastic surface requirement: parting surface as plastic garden tools set without affecting the appearance of the plastic parts and plastic parts appearance requirements.
Technical specifications of 2 injection machine account:
A. mode locking force is considered: as much as possible to reduce the projection area of the plastic parts in the parting plane. When the maximum injection area projection area of plastic parts in the parting surface is close to close to the injection machine, has produced the overflow may, machinery blade die parting surface size to ensure no overflow condition, it should be possible to reduce the parting surface contact area, contact pressure to increase the die surface, prevent overflow, and simplify the parting surface processing.
The B. template spacing to consider: parting surface is determined to ensure that the male and the female mould opening stroke the shortest.
Consider 3 mechanical blade structure
A. try to simplify mold parts
A. for children garden tools release, should make the plastic parts in the mold in the mold as much as possible, as long as the plastic snow scoops binding force and the male die than plastic binding force to piece and the female die, as far as possible the binding force between the plastic and die so ugly, but don't put the plastic parts with blade and mechanical force on the male die.
B. when the plastic parts of the shape is simple, but the inner shape more complex hole or holes, plastic molding must remain in the mold, the mold fossa can be located in the master mold, the mold can be used to push plate plastic parts, if the mould nest in the public mode, the difficulty of stripping.
C. when a metal insert, because insert will not shrink wrapping die, so die wo should be located in the mold, or opening the mould in plastic parts mold, the difficulty of stripping.
D. if the plastic mold is symmetrically distributed, should be forced to remain in the public mode of plastic parts, pipe jacking demoulding.
B. side core pulling mechanism considering.
A. should try to avoid the side core pulling mechanism, if cannot avoid the side core pulling, should make the core pulling as short as possible.
B. due to inclined sliding block mould locking force is small, for large plastic parts projected area larger, the plastic leaf rakes parts projection area of parting surface on the main plane in the male and the female mold clamping, and will die projection area smaller surface as a side parting surface, otherwise the slanting slide lock locking device must be very large, or the lock is not tight and flash C. convenient pouring system arrangement: the parting surface is determined not to impede the normal opening gating system.
D.: children garden tools in order to facilitate the exhaust is conducive to the discharge gas, the parting plane as far as possible with the material flow end overlap.
E. is easy to insert placed: when parting surface after opening, to have a certain space insert.
Simplify the overall structure of F. mechanical blade, minimize the number of parting surface, as far as possible the use of flat type surface. Consideration should also be given to mechanical blade is easy processing, easy to take out the finished products, and the parting surface should be chosen in the product line.
4 mechanical blade manufacturing difficulty consideration: to ensure mechanical blade easy mechanical processing.
2014年9月7日星期日
Differences in the plastic garden tools blade
Before using the plastic garden tools blade, we must determine a fact, the blade and the childrens garden tool has a great difference.
The next is the fact that the number of cutting edge of each blade is relatively less. In many shops, car blade is triangular or rhombic. The number of the best combination of cutting edge (mechanical blade) and cutting edge strength (diamond blade) the possibility of convex triangular blade provides apparent in many workshops are not enough cognition.
In twentieth Century 70 time, the best childrens garden tools is to use large size, strong blade. Hard alloy used in that era is hard, but the toughness is not good enough. Plastic garden tools blade strength by its size (large blade = thick blade = high strength blade) to ensure. Three times a blade of the cutting edge length of at least more than cutting depth. Two things have changed at the same time. On the one hand, the average cutting depth for turning has been significantly reduced. A study carried out by the seco tools that average cutting depth, the plastic snow scoops is about 2.5~3mm. On the other hand, the fourth generation of hard alloy today has good toughness, but also its hardness (wear) higher. This means that for today's blade, the relationship between the cutting edge length and the cutting depth can change. The latest generation of blade geometry is suitable for the new situation.
订阅:
博文 (Atom)




